Siemens SINAMICS S120 Commissioning Manual page 198

Commissioning
5.7 Basic parameterization of the drive objects
Proceed as follows to deactivate the know-how protection temporarily:
1. Click on "Deactivation".
The corresponding dialog is opened. The following options are available:
2. Select option "Temporary deactivation for configuration changes" option.
Know-how protection is deactivated.
3. Enter the existing password for know-how protection.
4. To save the setting retentively, click .
Know-how protection is temporarily deactivated and can be reactivated at any time with the
selected protection settings.
Deactivating know-how protection permanently
Proceed as follows to deactivate the know-how protection permanently:
1. Click on "Deactivation".
The corresponding dialog is opened. The following options are available:
2. Select option "Permanent deactivation of the know-how protection".
A security prompt is displayed.
3. Enter the existing password for know-how protection.
4. If you want to permanently deactivate know-how protection, confirm the prompt with "Yes".
Know-how protection is deactivated and the protection settings are reset to the factory
settings.
5. To save the setting retentively, click .
Know-how protection is permanently deactivated and can be activated and reconfigured at any
time.
196
Commissioning with Startdrive
Commissioning Manual, 06/2020, 6SL3097-5AA10-0BP2