Startdrive engineering tool
3.5 User interface - trace function
3.5.1
Curve diagram
Overview
The curve diagram displays the selected signals of a recording. Binary signals are shown in the
lower diagram as bit track. You can adapt the display of the signals in the signal table and with
the toolbar of the curve diagram.
Setting options and displays in the curve diagram
The following figure shows an example of the representation in Startdrive:
Figure 3-12
Overview: Curve diagram
56
Commissioning with Startdrive
Commissioning Manual, 06/2020, 6SL3097-5AA10-0BP2