Siemens SINAMICS S120 Commissioning Manual page 60

Startdrive engineering tool
3.5 User interface - trace function
Layout of the "Measurements" tab
The following figure shows an example of the structure of the "Measurements" tab.
①
②
③
Figure 3-13
58
"Trigger/measurement point":
This option facilitates the alignment of the measurements in accordance with the trigger or meas‐
urement point. The individual zero point for the measurement is predefined in the table under the
"Alignment" column.
"Time stamp (absolute time)":
This option facilitates the alignment of the measurements in accordance with the time stamp. The
signals are aligned in accordance with the time from the absolute time stamp.
"Name":
The measurement names and change options are displayed here.
"Alignment":
The individual zero point of a measurement is defined here. All of the displayed signals of the
measurement are relative to the defined zero point.
"Offset":
The measurement can be moved left or right on the time axis by the specified offset here.
"Time stamp":
The trigger instant is displayed here.
"Comment":
The comments and input option for a signal are displayed here.
Example: "Measurements" tab
Commissioning with Startdrive
Commissioning Manual, 06/2020, 6SL3097-5AA10-0BP2