Making Detailed Settings - Siemens SINAMICS S120 Commissioning Manual

Commissioning
5.3 Creating a project offline
5.3.6.4

Making detailed settings

Overview
The following detail settings can be carried out in the inspector window for Motor Modules and
Power Modules:
• Settings
– Allows the modification of the preallocated supply voltage.
– Indicates the standard for power settings of the converter and motor.
• Supplementary data
– Allows filter settings for modules of the "Vector" type drive object.
The procedure described below shows the detailed settings using a Power Module as example
and is the same for both types of modules.
Procedure
To make the detailed settings for a Power Module, proceed as follows:
1. Select the desired Power Module in the device view and open the inspector window.
2. Select the menu "Power Module Details > Power Module Settings" in the inspector window.
The preallocated supply voltage is displayed in the screen forms:
3. Enter a new supply voltage as required.
4. If you use the "Vector" drive object type, then you can set additional data.
Select the menu "Power Module Details > Power Module Additional Data" in the inspector
window.
130
Commissioning with Startdrive
Commissioning Manual, 06/2020, 6SL3097-5AA10-0BP2