Siemens SINAMICS S120 Commissioning Manual page 77

Procedure
To interconnect a BICO output, proceed as follows:
1. Click the binector
A connection dialog for the selection of the possible parameters opens. The drive object for
which you want to make an interconnection is displayed automatically in the "Drive object"
drop-down list on the right.
The last set signal sink is displayed in the "Selected sinks" field. If a connection was not
available previously, the text "No sink selected" is displayed.
2. Activate the check boxes for the parameters that you want to connect.
If connectable bits of the parameter are available, they are displayed in a drop-down list.
Commissioning with Startdrive
Commissioning Manual, 06/2020, 6SL3097-5AA10-0BP2
or connector symbol
4.3 BICO interconnections
of the signal that you want to connect.
Fundamentals
75