Siemens SINAMICS S120 Commissioning Manual page 196

Commissioning
5.7 Basic parameterization of the drive objects
• A Siemens memory card is inserted in the converter. This requirement applies to know-how
protection with basic copy protection and extended copy protection.
• Optional:
– The drive unit is fully commissioned.
– The exception list for know-how protection is created. No critical parameters have been
Selecting and activating the protection setting
Proceed as follows to select and activate the desired protection setting:
1. If you have already added know-how parameters to the exception list before activating know-
how protection, make sure that you have not added any critical parameters (see Chapter
"Managing the exception list (Page 197)").
Note
Parameters in the exception list can be read and modified
With activated know-how protection, parameters in the exception list can be read and
modified in other commissioning tools and in the web server. Therefore, do not add any
critical parameters to the exception list.
2. Establish an online connection to your drive.
3. Select the "Drive control > Parameters" menu in the project navigator.
4. In the secondary navigation, select menu "Basic parameterization > Write and know-how
protection".
The "Write and know-how protection" screen form is displayed with the available protection
settings.
5. Select the required setting.
The following settings are available:
– Know-how protection without copy protection (default setting)
– Basic copy protection
– Extended copy protection
6. To activate use of diagnostic functions with enabled know-how protection, select the option
"Permit trace and measuring functions for diagnostic purposes".
194
added to the exception list.
Commissioning with Startdrive
Commissioning Manual, 06/2020, 6SL3097-5AA10-0BP2