Commissioning
5.3 Creating a project offline
5.3.5.2
Specifying an infeed unit
Overview
Initially, after creating an infeed unit in the configuration, only one non-specified placeholder is
available. Using an article number, this placeholder must be specified in more detail. As a result,
you ensure that the component in the device view corresponds to the component that is
contained in your drive configuration.
Procedure
To specify an infeed unit, proceed as follows:
1. Click in the white field of the non-specified infeed unit.
2. Open the inspector window if it is not already open.
112
Commissioning with Startdrive
Commissioning Manual, 06/2020, 6SL3097-5AA10-0BP2