Siemens SINAMICS S120 Commissioning Manual page 159

Procedure
To establish an online connection between your PG/PC and the drive, proceed as follows:
1. Select the drive unit with which you want to go online in the project tree (or in the device
view).
2. Click the "Go online" button.
The corresponding dialog is opened.
3. In drop-down list "Type of the PG/PC interface", select option "PN/IE".
4. In drop-down list "PG/PC interface", select the interface of your PG/PC.
5. In drop-down list "Connection to interface/subnet", select option "Direct at slot 'CU X127'".
6. Select one of the following search options in the "Select target device" drop-down list:
– Show devices with the same addresses
– Show all compatible devices
– Display accessible devices
7. In order to search for the drive unit with the set parameters, click "Start search".
The devices that are found are displayed in the table of results.
Commissioning with Startdrive
Commissioning Manual, 06/2020, 6SL3097-5AA10-0BP2
5.4 Establishing an online connection to the drive
Commissioning
157