Configuring A Trace - Siemens SINAMICS S120 Commissioning Manual

Displaying a saved trace configuration or an appropriate curve diagram
To display a saved trace configuration, proceed as follows:
1. In the project tree, double-click on the appropriate icon (
configuration, a trace in the drive or a measurement.
The "Configuration" or "Diagram" tab is opened in the working area.
2. If necessary, click on the "Configuration" tab to display it.
OR
3. If, instead of the trace configuration, you wish to display the curve diagram, then click on the
"Diagram" tab.
6.2.2.2

Configuring a trace

Overview
A trace configuration is made up of the following subsections in which settings must be made:
• Selecting and configuring signals
• Configuring recording conditions
Note
Backing up the trace data
The trace configuration is saved power-independently. The data is kept even when switching off
and switching on.
Records are not automatically saved, and are therefore lost when the system is switched off. As
a consequence, trace recordings must be manually saved in the project (see Chapter "Saving a
trace recording in the project (Page 325)") - or exported in a file structure (see Chapter
"Importing and exporting a trace recording (Page 326)").
Commissioning with Startdrive
Commissioning Manual, 06/2020, 6SL3097-5AA10-0BP2
Diagnostics
6.2 Diagnostics via Startdrive
offline / online) of the trace
319