Device View - Siemens SINAMICS S120 Commissioning Manual

Startdrive engineering tool
3.2 User interface - parameterization
Components
Supplementary system
components
The PM240-2 Power Module is inserted together with a Control Unit Adapter (CUA) in the device configuration. The following
1)
types are available: CUA31, CUA32.
The motors are sorted according to motor type and article number and are displayed with a generic article number.
2)
Different number of components in other Control Units
The components listed in the previous table are used only in part by other Control Units that are
based on a CU320-2 PN (e.g.: S150, G150 or G130).
You will find further information about configurable components in the Startdrive information
system.
3.2.2

Device view

Overview
Configure the drive line-up in the device view. You insert components and edit the DRIVE-CLiQ
connections. You can call the device view by double-clicking the "Device configuration" entry in
the project tree.
The device view provides a graphical display of all of the configured modules and their
interfaces. Withdrawable units for optional modules are also displayed.
40
Designation
Communication Boards
DRIVE-CLiQ Hub Modules
Terminal Boards
Terminal Modules
Voltage Sensing Modules
Types of construction
Commissioning Manual, 06/2020, 6SL3097-5AA10-0BP2
CU310-2 PN CU320-2 PN
– x
x x
– x
x x
x x
Commissioning with Startdrive