Siemens SINAMICS S120 Commissioning Manual page 177

Performing device configuration identification
To determine the drive configuration via the function "Detection of the device configuration",
proceed as follows:
1. Select the desired drive in the project tree or in the device configuration.
2. Call the "Device configuration detection" shortcut menu.
The "Go online" dialog is displayed if an online connection to the drive has not yet been
established.
3. Establish an online connection to the drive.
Result
• The topology of the drive is read out. Existing DRIVE-CLiQ interconnections are imported
directly from the actual topology of the drive.
• The "Detection of the device configuration" dialog opens.
Overview of the read-out components
All of the read-out components are displayed in an overview. The list shows all components
which can be assigned to a main component (e.g. infeed unit).
Commissioning with Startdrive
Commissioning Manual, 06/2020, 6SL3097-5AA10-0BP2
5.6 Alternative 2: Creating a project with a determined drive configuration
Commissioning
175