Figure 4-10 Floor Mount Spacing Guide - NEC Univerge SV8100 System Hardware Manual

UNIVERGE SV8100/SV8300
3.2
System Hardware Manual
Floor Mounting the 19" Chassis
The CHS2U-US controlling and expansion chassis can be mounted on the
floor using the CHS BASE UNIT and the CHS2U JOINT BRACKET KIT.
3.2.1 CHS2U-US Chassis Installation
1. Use the template shown in
Guide
(10mm) anchor bolts (locally procured).
2. Mark and drill the four holes required for installing the CHS
BASE UNIT.
3. Using anchor bolts, secure the CHS BASE UNIT to the floor.
Refer to
Bolts on page 4-16
Figure 4-10 Floor Mount Spacing
for required spacing before drilling holes for 0.39"

Figure 4-10 Floor Mount Spacing Guide

Figure 4-11 Secure CHS BASE UNIT with Anchor
for screw location.
Issue 1.0
4 - 15