Issue 1.0
5 - 76
3.
Swing access panel outward and unplug fan power cable. See
Figure 5-104 Opening Chassis Access Panel (CHS2U-US
Chassis).
Figure 5-104 Opening Chassis Access Panel (CHS2U-US Chassis)
4.
Remove chassis access panel from rear of chassis.
5.
Remove cabling from retention clips. See
Access Panel
Figure 5-105 Chassis Access Panel Removed
6.
Remove two screws securing fan to access cover. Keep
screws for use when installing replacement fan (refer to
5-105 Chassis Access Panel Removed on page
UNIVERGE SV8100/SV8300
Removed.
Installing the SV8300 Chassis
Fan Power Cable Plug
Figure 5-105 Chassis
Figure
5-76).