Figure 4-77 Removing The Mps7101 Screws - NEC Univerge SV8100 System Hardware Manual

UNIVERGE SV8100/SV8300
System Hardware Manual
14. Loosen and remove the screws securing the MPS7101 to the
chassis (refer to
15. Carefully lift the MPS7101 from the chassis and set aside.
5.1.2 Install MPS7101
1. Align replacement MPS7101 circuit board with screw holes in
chassis.
2. Install the screws securing MPS7101 the to the chassis (refer
to Figure 4-77 Removing the MPS7101 Screws on page
3. Install the FG lug. See
page 4-60.
Figure 4-77 Removing the MPS7101

Figure 4-77 Removing the MPS7101 Screws

Overtightening the screws can damage the
MPS7101 circuit board.
Figure 4-76 Chassis Grounding Lug on
Issue 1.0
Screws).
4-61).
4 - 61