Figure 5-39 19" Chs2U-Us Expansion Chassis - NEC Univerge SV8100 System Hardware Manual

Issue 1.0
5 - 36
3. Slide the CC-CP00 blade into the chassis until resistance (back
plane) is felt.
4. Gently push until the blade seats. Tighten the two retaining
screws on front of the blade.
3.5.4 Installing the 19" Expansion Chassis
1. Ensure the chassis is powered down.
2. Align the blade with the universal slots of the Expansion
Chassis.

Figure 5-39 19" CHS2U-US Expansion Chassis

3. Slide the blade into the chassis until resistance (back plane) is
felt.
4. Gently push until the blade seats. Tighten the two retaining
screws on front of the blade.
3.5.5 Installing Expansion Blades in the 19" Chassis (Optional)
When adding additional chassis to the system to expand the
capacity, a PZ-BS10 must be installed in the Controlling Chassis and
a PZ-BS11 must be installed in all Expansion Chassis. This
connection is required with any multiple-chassis setup.
Do not remove or install this blade with the
power on.
UNIVERGE SV8100/SV8300
Installing the SV8300 Chassis