Issue 1.0
7 - 68
6.
7.
5.2.10
Removing the Multiline Terminal from the Wall Mounted Plate.
To remove the Multiline Terminal, push up on the telephone until it
comes loose.
Installing DT300/DT700 Series (DTL/ITL) Digital and IP Multiline Terminals
Align the two holes on the back of the WM-L UNIT
with the two screws on the wall plate and slide
downward (refer to
Terminal Wall on Wall
Figure 7-83 Mount Multiline Terminal Wall on Wall Plate
Because of strength variation in switch boxes, this
method is not recommended.
Push excess line cord behind the Multiline Terminal.
Figure 7-84 Removing the Multiline Terminal
UNIVERGE SV8100/SV8300
Figure 7-83 Mount Multiline
Plate).