Figure 6-6 Cc-Cp00 Blade; Table 6-10 Cc-Cp00 Switch Settings - NEC Univerge SV8100 System Hardware Manual

UNIVERGE SV8100/SV8300
Switch
Reset
(Push Switch)
Sense
(Rotary Switch)
= For details, refer to Command Manual
System Hardware Manual
3.2.3 Switch Settings
Refer to

Table 6-10 CC-CP00 Switch Settings

system reset and with system power on.
on page 6-25
blade.
Table 6-10 CC-CP00 Switch Settings
Setting
Position
– For system reset
0 On-line (Call processing is in progress): for Remote Unit
1 On-line (Call processing is in progress): for Unit 1
2 On-line (Call processing is in progress): for Unit 2
3 On-line (Call processing is in progress): for Unit 3
4 On-line (Call processing is in progress): for Unit 4
8
Off-line (Call processing is stopped): Program upgrade (FTP)
A Off-line (Call processing is stopped): Standard office data setting
E Off-line (Call processing is stopped)
RS1/RS2 port: 9600bps fixed
ETHERNET/VOIP port: Default setting
F Off-line (Call processing is stopped)
RS1/RS2 port: AS per CM40Y=08
ETHERNET/VOIP port: Default setting
5-7, B-D Not Used
shows the location of the switches on the CC-CP00
Function
Issue 1.0
for system restart/

Figure 6-6 CC-CP00 Blade

6 - 29