Figure 4-24 Rack Mount 19" Chs2U-Us - NEC Univerge SV8100 System Hardware Manual

Issue 1.0
4 - 26
Repeat for additional chassis mounting.
Figure 4-23 Rack Mount Bracket Installed 19" CHS2U-US
4. Carefully slide the chassis into desired location within the rack. Make
sure the hooks on the mounting bracket are inserted into the back of the
chassis, securing it in place. Note that the cabling is run through the front
of the rack for ease of access.
Each CHS2U-US chassis will require approximately
3.5" of height within the rack.
5. Secure the brackets to the rack using the screws supplied.
Repeat for additional chassis mounting.
Single Rack Mount
CHS2U-US

Figure 4-24 Rack Mount 19" CHS2U-US

UNIVERGE SV8100/SV8300
Single Rack Mount
CHS2U-US
with Three Expansion Chassis
Installing the SV8100 Chassis