Figure 11-36 Digital Station Ports - NEC Univerge SV8100 System Hardware Manual

Hide thumbs Also See for Univerge SV8100:

Table of Contents

Connect the telephone wiring to the 4-Port Digital

Call Logging Unit. Be sure to note which extension

is connected to which port of the devices (each

device has a unique serial number). In the

Recorder window you will see the serial number

followed by a trailing digit (1 ~ 4), this identifies the

port on the device.

Label each Digital Station Port with the extension it

will be recording. Refer to

Figure 11-36 Digital Station Ports

Install the 4-Port Digital Call Logging Unit BackOffice

Insert the NEC BackOffice CD into the CD drive of

Locate the Recorder folder.

Click on the Setup.exe file in the Recorder folder.

Select Telephone System-Type.

Select Install Location or Next to choose default

(recommended) location.

Select Finish.

UNIVERGE SV8100/SV8300

Before the telephone wiring is connected, the devices

may temporarily show "Failed" and then reinitialize.

This is normal operation.

Figure 11-36 Digital

Choose European if in a territory that uses

A-Law or US for the US and territories that use

Installing SV8100/SV8300 Optional Equipment

Show Quick Links

Table of Contents

Univerge sv8300