Figure 6-31 Cd-4Odta Blade - NEC Univerge SV8100 System Hardware Manual

Issue 1.0
5.7
6 - 94
CD-4ODTA (4-Port Tie Line Interface Blade)

Figure 6-31 CD-4ODTA Blade

5.7.1 Description
The CD-4ODTA Tie Line blade is an out band dial type analog tie
line interface blade. This blade supports system connections to
either 2-wire (four lead, tip/ring) or 4-wire (eight lead, tip/ring/tip 1/
ring 1) E&M signalling tie lines (determined in Program 10-13
[SV8100] and CM35Y=105 [SV8300]). System programming is also
used to select the connection types with Type 1 or Type V. The
CD-4ODTA consumes 4 ports ranging between ports 001~200
(SV8100) and 000~511 (SV8300). Each blade requires one
universal slot and provides:
UNIVERGE SV8100/SV8300
Installing the SV8100/SV8300 Blades