UNIVERGE SV8100/SV8300
System Hardware Manual
8.
Refer to
installation of the chassis or, Chapter 5 paragraph
Installing an Extension or Trunk Blade on page 6-4
installation of blades.
3.2.2
Multiple CHS2U-US Chassis Installation
Expansion chassis can be secured to the CHS BASE UNIT and will
require an additional CHS2U JOINT BRACKET KIT per chassis.
1.
Install the five rubber feet to the bottom of each chassis.
2.
Using supplied screws, attach joint brackets to both ends of the
19" chassis and the CHS BASE UNIT. Refer to
Install Joint Brackets with Screws on page
3.5 Installing the 19" Chassis on page 5-34
Figure 5-18 Install Rubber Feet
Figure 5-19 Install Joint Brackets with Screws
Issue 1.0
to continue
2.2
for
Figure 5-19
5-19.
Joint
Brackets
5 - 19