Issue 2.0
3 - 68
2.
Mark and drill the four holes required to install the CHS BASE
UNIT.
3.
Using anchor bolts, secure the CHS BASE UNIT to the floor.
Refer to
Figure 3-78 Secure CHS BASE UNIT with Anchor
Bolts
for screw location.
Figure 3-78 Secure CHS BASE UNIT with Anchor Bolts
4.
Install the five rubber feet to the bottom of the chassis.
Figure 3-79 Install Rubber Feet (19" Chassis)
5.
Position the chassis on top of the CHS BASE UNIT.
UNIVERGE SV8100
Installing the SV8100 Chassis