UNIVERGE SV8100
System Hardware Manual
3.2.2
Switch Settings
The AD(A)-R Unit has two switch locations SW1/SW2. The location
of the switches on the AD(A)-R Unit is illustrated in
AD(A)-R Switch Default
technician to configure the unit for specific settings.
To provide control to the recorder or to enable/disable the record
start warning tones, refer to
Settings.
Switch
SW1
SW2
Settings. The dip switches (DSW) allow a
Figure 11-13 AD(A)-R Switch Default Settings
Table 11-2 AD(A)-R Unit Switch
Table 11-2 AD(A)-R Unit Switch Settings
SW1-1
Connects to multiline terminal
Connect = Default
SW1-2
Not Used
Sets External Equipment Impedance to 600
SW2-1
SW2-2
Used for Complex Impedance Devices
(< 30 Input Impedance)
Figure 11-13
Description/Settings
Issue 2.0
11 - 11