Figure 11-32 Installing The Connector Plate; Figure 11-33 Installing Base Units On The Wall; Wall Mounting Adm And Multiline Terminal - NEC Univerge SV8100 System Hardware Manual

UNIVERGE SV8100
System Hardware Manual
5. Install the connector plate provided with the ADM as shown in

Figure 11-32 Installing the Connector Plate


The connector plate cannot be used with InMail terminals.
6. Replace the base units as shown in
Multiline Terminal with Base Covers
4.2.2

Wall Mounting ADM and Multiline Terminal

1. Remove both base units.
2. Remove the multiline terminal base Unit cutout shown in
Figure 11-33 Installing Base Units on the Wall on page
3. Install the base units on the wall using the eight screws.
Figure 11-32 Installing the Connector Plate
Issue 2.0
on the next page.
Figure 11-31 ADM and
Removed.
11-32.
11 - 31