Figure 3-124 Install The Fan Access Panel; Figure 3-125 Removing Chs Large Batt Box Cover; Chs Large Batt Box Fuse Replacement - NEC Univerge SV8100 System Hardware Manual

UNIVERGE SV8100
System Hardware Manual
6. Insert the access panel tab into the rear of the CHS1U-US
chassis running the Battery Connection Cable through the
cutout. Secure panel with the retaining screw.
7. Connect grounding and AC power cables.
8. Apply power to chassis (refer to
the SV8100 System on page
8.2.4

CHS LARGE BATT BOX Fuse Replacement

1. Loosen screw on front of CHS LARGE BATT BOX.

Figure 3-125 Removing CHS LARGE BATT BOX Cover

2. Remove two screws from front of Battery Tray Suppressor
(Refer to
page 3-102).

Figure 3-124 Install the Fan Access Panel

4-9).
Figure 3-126 Removing Battery Tray Suppressor on
Chapter 4, 2.6 Powering Up
Issue 2.0
3 - 101