UNIVERGE SV8100
System Hardware Manual
3.3.1
Switch Settings
The AP(A)-R Unit and AP(R)-R Unit have three switch locations.
Refer to
Table 11-3 AP(A)-R/AP(R)-R Unit Switch Settings
description of each switch and an explanation of the settings.
Figure 11-16 AP(A)-R Unit/AP(R)-R Unit Switches
Table 11-3 AP(A)-R/AP(R)-R Unit Switch Settings
Switch
SW1
SW3
Dip
Switches
(DSW)
SW1-1
Connects to multiline terminal (default).
SW1-2
Not Used
Sets impedance to 600 for devices such as
SW3-1
modems or facsimile machines.
SW3-2
Used for complex impedance devices such as
single line telephones.
DSW
Leave switches at default.
1~8
Description/Settings
Issue 2.0
for a
11 - 15