Table 8-4 Conference Max Plus Programming Options - NEC Univerge SV8100 System Hardware Manual

UNIVERGE SV8100
3.4
System Hardware Manual
Table 8-3 Conference Max Plus Keypad Functions (Continued)
Key
CLEAR (vertical line
and left arrow icon)
VOLUME (loud and
dim speaker icons)
MUTE (mic with
diagonal line icon)
Programming Options
To enter Programming mode, press and hold REDIAL until a diamond arrow is
displayed on the LCD. Then press the applicable key and follow the instruction
in Table 8-4 Conference Max Plus Programming

Table 8-4 Conference Max Plus Programming Options

Menu Option Key
Ringer Melody 1
Dialing Mode 2
Flash Duration 3
* 4
Local Number
* 5
Conference
Press to clear the last digit entered or press and hold to
clear all numbers.
Press to exit programming mode.
Press during call to adjust call volume or press while
telephone is ringing or in standby mode to adjust ringer
volume.
Press to mute sound.
Press REDIAL. The current melody selection flashes.
Press 1~5 to change melody. Press REDIAL to save
the selection.
Press REDIAL. The current dialing selection flashes.
Press 1 for tone or 2 for pulse. Press REDIAL to save
the selection.
Press REDIAL. The current duration flashes. Press
1~5 to select duration as follows:
1 = 600ms
2 = 300ms
3 = 150ms
4 = 100ms
5 = 80ms
Press REDIAL to save the selection.
Press REDIAL. Enter the telephone number that you
want displayed on the LCD in standby mode. Press
REDIAL to save the number.
Press REDIAL. Enter the telephone number you want
the conference key to dial. Press REDIAL to save the
number.
Function
Options.
Programming
Issue 2.0
8 - 7