Table 4-15 Ipk Ii Supported Hardware - NEC Univerge SV8100 System Hardware Manual

UNIVERGE SV8100
System Hardware Manual
1. Install MGN-U10 ETU into IPK/IPK II CPU/EXP slot.
2. Install PZ-BS10 into the expansion slot in the SV8100.
3. Connect the CAT 5 cables between CN5~CN7 on the
MGN-U10 ETU to CN2~CN4 on the PZ-BS10.
4. Power on the IPK/IPK II KSU.
5. Power on the SV8100 main chassis and allow it to boot
completely. Allow the green FS1~3_ACT lights on the
MGN-U10 to come on steady, and wait for the red live light to
begin flashing.
6. Make programming changes as necessary.
3.5.4 Supported Hardware (IPK II)
EXP
ESI
SLI
Do not plug the CAT5 cables in to any other

interface i.e. DLCA as serious damage
could occur.
Ensure the CAT 5 LAN cable is connected

between CN5~CN7 on the MGN-U10 ETU
to CN2~CN4 on the PZ-BS10.
IPK/IPK II PCPro data does not upload to a
migration package.

Table 4-15 IPK II Supported Hardware

Package Name
EXP-U10
ESI(8)-U10
ESIB(8)/ESIE(8)-U10
ESIB(8)/ESIE(8)-U20
SLIB(4)/SLIE(4)-U10
SLI(8)-U10
SLIB(4)/SLIE(4)-U10
(F/W 1.74 or above)
Description Supported
Expansion Unit
8-Port Electronic
Station Interface
8-Port Electronic
Station Interface
8-Port Electronic
Station Interface
4-Port Single Line
Interface
8-Port Single Line
Interface
4-Port Single Line
Interface
Issue 2.0
Y
Y
Y
Y
Y
Y
Y
4 - 39