Package Contents - NEC Univerge SV8100 System Hardware Manual

UNIVERGE SV8100
System Hardware Manual
11.5.4

Package Contents

The 4-Port Digital Call Logging Unit is packaged with everything
necessary for installation including:
Software CD

USB Cable

Quick-start installation manual

11.5.5 Hardware and Software Requirements
4-Port Digital Call Logging Unit:
A Pentium

512 Mb RAM.

Windows XP, Windows 2000 Professional SP4, or 2003.

One USB Controller Card for each four devices – powered

USB hubs can be used however, no more than four
devices should be connected to a USB Controller Card.
An available PCI slot for each USB Controller Card.

LAN connection for remote access to stored calls.

NEC BackOffice Recorder software.

 Calls should be stored on the same host PC.
 Using the GSM 6.10 Compression option, each 1Gb of Hard Disk
storage allows recording of about 168 hours of calls.
16-Port Digital Call Logging Unit:
A Pentium

1 Gb RAM.

Windows XP/PRO, Windows 2000 Professional SP4, or

2003.
One USB Controller Card for each two devices – powered

USB hubs can be used however, no more than two
devices should be connected to a USB Controller Card.
An available PCI slot for each USB Controller Card.

LAN connection for remote access to stored calls.

NEC BackOffice Recorder software.

 Calls should be stored on the same host PC.
 Using the GSM 6.10 Compression option, each 1Gb of Hard Disk
storage allows recording of about 168 hours of calls.
®
4 equipped with:
®
4, 2.5 GHz equipped with:
Issue 2.0
9 - 47