NEC Univerge SV8100 System Hardware Manual page 268

Issue 2.0
4 - 18
Ethernet Interface Circuit

PZ-BS10/PZ-BS11 Interface Circuit

Main Processing 32-Bit CPU Circuit (MPC8248 @ 2

Time Switch, Optional Blade Control Circuit

Backboard Interface Circuit

The CD-CP00-US provides:
200 trunk ports maximum

512 extension ports maximum

– 512 ports digital/IP extensions maximum
– 320 analog ports maximum
256 virtual extensions

Connection for PZ-32IPLA/PZ-64IPLA/PZ-128IPLA Daughter Board

Connection for PZ-VM21 Daughter Board

Connection for Expanded Memory (PZ-ME50-US Daughter Board)

Supports TAPI 2.x

One Green Status LED

Four Red Status LEDs

Five diagnostic LEDs which indicate the status of various system

functions
During normal operation, the RUN LED is flashing and the remaining

LEDs are off
Time Division Multiplex Switch (TDM Switch)

Digital Phase Locked Loop (DPLL)

Tone Generator

Tone Processing DSP

Connection for Memory Module

Digital Signal Processor (DSP)

DTMF Tone Sender

DTMF Tone Receiver

Dial Tone Generator (DTG)

The PZ-BS10 provides 64 channels for Telephony Resource (e.g.,

DTMF Receiver, Caller ID Receiver, and Call Progress Tone Detection)
System Tone Sender

MF Receiver

MF Sender

UNIVERGE SV8100
MHz)
66
Installing the SV8100 Blades