Outside Line Types - NEC Univerge SV8100 System Hardware Manual

UNIVERGE SV8100
6.4
System Hardware Manual
Recommended Long Term Humidity: 10 ~ 90% RH

Blades – CD-4LCA with PZ-4LCA Daughter Board, CD-8LCA with
PZ-8LCE Daughter Board, CD-4COTB with PZ-4COTF Daughter Board,
CD-PRTA
Operating Temperature: +32°F ~ +104°F (0°C ~ 40°C)

Recommended Long Term Temperature: -4°F ~ +140°F

(-20°C ~ 60°C)
Operating Humidity: 10 ~ 90% RH (non-condensing)

Recommended Long Term Humidity: 20 ~ 90% RH

Door Box
Operating Temperature: -4°F ~ +104

Operating Humidity: 20 ~ 80% (non-condensing)

SV8100 Power Supply –
Operating Temperature: +32°F ~ +104°F (0

Recommended Long Term Temperature: -4F ~ 167

Operating Humidity: 20 ~ 95% RH (non-condensing)

Recommended Long Term Humidity: 10 ~ 95% RH


Outside Line Types

The following outside lines can be used with the UNIVERGE SV8100 system.
 2-wire, Loop Start or Ground Start Trunks
2-wire, 2-way DID Lines (Dial Pulse or DTMF)


DID feature is not available for Europe and Australia market.
4-wire, E&M Tie Lines (Type I or V, Dial Pulse, or DTMF)

 Digital Trunk T1/FT1 (Loop Start, Ground Start, Tie Line (E&M), or DID
Signaling)
 ISDN-BRI Trunks
 ISDN-PRI Trunks
VoIP Trunks (Internet Protocols)

o o
F (-20 C ~ 60
MPS7101
o
C ~ +40
Issue 2.0
o
C
o
C)
o o o
F (-40 C ~ 75 C)
2 - 31