Applying Power To The Base Unit - NEC Univerge SV8100 System Hardware Manual

Issue 2.0
3.3
6 - 6
term
To connect the D Cordless Terminal to the host telephone:
1. Unplug the telephone line cord from the host telephone, and connect it to
the LINE IN jack.
2. Using the telephone line cord supplied with the D
connect the LINE OUT jack to the host telephone jack.

Applying Power to the Base Unit

1. Plug the AC Adapter cord in the AC Adapter input jack on the Base Unit.

Use only the AC Adapter supplied with the D
2. Plug the AC Adapter into a standard 120 Vac wall outlet.
3. Route the power cord where it does not create a trip hazard or where it
could become chafed and create a fire or other electrical hazards.
 The AC Adapter furnished with this telephone usually has a polarized line plug
with one blade wider than the other. This plug fits into the power outlet only one
way. When you cannot insert the plug fully into the outlet, reverse the plug.
When the plug still does not fit, contact your facilities coordinator about
replacing the obsolete plug. Do not alter the shape of the blades of the polarized
plug.
Line OUT to Host
term
Figure 6-5 Connecting the Base Unit
Installing SV8100 Cordless Telephones
UNIVERGE SV8100
term
Cordless Terminal,
Handset Cordless Terminal.
Line IN from
Telephone Jack