Figure 9-1 Pgd(2)-U10 Adp; Table 9-1 Pgd(2)-U10 Adp Led Indications - NEC Univerge SV8100 System Hardware Manual

Issue 2.0
2.2
2.3
9 - 2
The PGD(2)-U10 ADP connects to any available digital extension port. The
terminal connections made in the PGD(2)-U10 ADP and the jumper settings
determine what features are used for each circuit.
Channel 1
Status LED
LED Indications

Table 9-1 PGD(2)-U10 ADP LED Indications

LED Indication
LED 1 Green LED when
CH1 in use.
LED 2 Green LED when
CH2 in use.
Setting up PGD(2)-U10 ADP Connections
 If the PGD(2)-U10 ADP is to be wall mounted, all the cable connections
should be made first.
For the module to ID correctly after setting the jumpers, set the circuit type

to 0 for the module port in Program 10-03-01 prior to connecting the line
cord to the PGD(2)-U10 ADP.
Channel 2
Status LED

Figure 9-1 PGD(2)-U10 ADP

Flashing green LED indicates DIP Switch
setting and programming for CH1 are
conflicting.
Flashing green LED indicates DIP Switch
setting and programming for CH2 are
conflicting.
Installing SV8100 Optional Equipment
UNIVERGE SV8100
Note