Figure 9-36 Digital Station Ports - NEC Univerge SV8100 System Hardware Manual

Issue 2.0
9 - 50
4. Leave the CD in the CD drive and connect the next
device, you may need to direct windows to the CD
with each device you connect. Also, you may need
to restart the PC with each device connection (this
may require two restarts per device).
5. After all devices are connected, restart the PC and
view the devices in Device Manager to ensure
proper installation.
6. Connect the telephone wiring to the 4- or 16-Port
Digital Call Logging Unit. Be sure to note which
extension is connected to which port of the devices
(each device has a unique serial number). In the
Recorder window you see the serial number
followed by a trailing digit (1~4), this identifies the
port on the device.
 Before the telephone wiring is connected, the devices
may temporarily show Failed and then reinitialize. This
is normal operation.
Label each Digital Station Port with the extension it
records. Refer to
4-Port Digital Call Logging Unit
Digital Station Ports
16-Port Digital Call Logging Unit
Digital Station Ports

Figure 9-36 Digital Station Ports

Installing SV8100 Optional Equipment
UNIVERGE SV8100
Figure 9-36 Digital Station Ports.