UNIVERGE SV8100
System Hardware Manual
3.
Swing access panel outward and unplug fan power cable.
Figure 3-143 Opening Chassis Access Panel (19" Chassis)
4.
Remove chassis access panel from rear of chassis.
5.
Remove cabling from retention clips.
Figure 3-144 Chassis Access Panel Removed (19" Chassis)
6.
Remove two screws securing fan to access cover. Keep
screws for use when installing replacement fan [refer to
3-144 Chassis Access Panel Removed (19"
10.1.2
Install Cooling Fan
1.
Align replacement fan with holes and secure with two screws
[refer to
Chassis)].
Figure 3-144 Chassis Access Panel Removed (19"
Issue 2.0
Fan Power Cable Plug
Figure
Chassis)].
3 - 113