Figure 3-73 Brackets Secured In Mounting Position With Screws - NEC Univerge SV8100 System Hardware Manual

Issue 2.0
3 - 64

Figure 3-73 Brackets Secured in Mounting Position with Screws

6. Rotate the brackets into the mounting position. Using the same
screws, secure the metal brackets to the bracket assembly
(refer to Figure 3-73 Brackets Secured in Mounting Position
with Screws).
7. Remove the end brackets from the remaining two corners and
set aside (refer to
3-65).
Figure 3-74 Remove End Brackets on page
Installing the SV8100 Chassis
UNIVERGE SV8100