Table 6-2 Firmware Compatibility Matrix; Section 8 Bluetooth Cordless Handset - NEC Univerge SV8100 System Hardware Manual

UNIVERGE SV8100
B
S 8
LUETOOTH
ECTION
8.1
Terminal xxx I xx or lower
Lot
(Version 8.10 and 1, E0 or lower)
Number
xxxJxx or higher
DT-330
(Version 2.20 or higher)

BCH Support may differ based on terminal firmware. To verify both DT-330 terminal and BCH-L Unit firmware, hold
down keypad buttons 1, 2 and 3 while plugging the line cord into the terminal.
System Hardware Manual
C
ORDLESS
Bluetooth Cordless Handset (BCH) Interface
This optional interface allows the multiline terminal user to use Bluetooth
technology to provide a cordless handset. This handset provides:
 Keyset-like Handset
Eight Line Buttons

Function Button

 Dial Button
Display

 All Multiline Terminal Functions with Main Unit
 Cradle Charges Handset
Base Side RF Block (50 meters, Class 1)

 Bluetooth Distance: 50 Meters
Up to 16 devices can be installed within a 100m (open area, ex: outdoors) or
50m (confined/blocked area, ex: indoors) radius and each device is located
with 1 meter between each device simultaneously. This maximum can be
affected by the installation environment.
The BCH and a Bluetooth headset (BTH) cannot be used at the same time.
When using a Bluetooth headset in place of the handset, the Plantronics
Voyager 510 headset is recommended.

Table 6-2 Firmware Compatibility Matrix

H
ANDSET
BCH-L Unit Lot Number
xxxDxx or lower
Supported
Not supported
Issue 2.0
xxxExx or higher
Supported
Supported
6 - 53