Figure 5-99 Attach Dss Wm-L Unit Using Screws; Figure 5-100 Attach Dss Wm-L Unit To Wall Plate - NEC Univerge SV8100 System Hardware Manual

UNIVERGE SV8100
System Hardware Manual
1. Attach the DSS WM-L UNIT to the wall using six
screws or, using two wall mounted screws (refer to
Figure 5-99 Attach DSS WM-L UNIT Using

Figure 5-99 Attach DSS WM-L UNIT Using Screws

5.2.8.2 Mount DCL-60-1 CONSOLE on Wall Plate using DSS
WM-L UNIT
1. Locate the screw holes on the base and hang the
cover over the screws on the wall plate as illustrated
in Figure 5-100 Attach DSS WM-L UNIT to Wall
Plate.

Figure 5-100 Attach DSS WM-L UNIT to Wall Plate

 Because of variation in wall plates, this method is not
recommended.
Issue 2.0
Screws).
5 - 83