Table 8-6 Sip Conference Max Programming Options - NEC Univerge SV8100 System Hardware Manual

UNIVERGE SV8100
4.4
System Hardware Manual
Programming Options
To enter Programming mode, press and hold REDIAL until a diamond arrow is
displayed on the LCD. Then press the applicable key and follow the instruction
in Table 8-4 Conference Max Plus Programming

Table 8-6 SIP Conference Max Programming Options

Menu Option Key
Ringer Melody 1
Dialing Mode 2
Flash Duration 3
* 4
Local Number
* 5
Conference
6
*
Service
 Press CLEAR to return the previous menu. Press and hold to exit programming
without saving changes.
*
Press and hold 1 to enter hyphen or
Press CLEAR before entering a new number.
Programming
Press REDIAL. The current melody selection flashes.
Press 1~5 to change melody. Press REDIAL to save
the selection.
Press REDIAL. The current dialing selection flashes.
Press 1 for tone or 2 for pulse. Press REDIAL to save
the selection.
Press REDIAL. The current duration flashes. Press
1~5 to select duration as follows:
1 = 600ms
2 = 300ms
3 = 150ms
4 = 100ms
5 = 80ms
Press REDIAL to save the selection.
Press REDIAL. Enter the telephone number that you
want displayed on the LCD in standby mode. Press
REDIAL to save the number.
Press REDIAL. Enter the telephone number you want
the conference key to dial. Press REDIAL to save the
number.
Press REDIAL. Enter the telephone number you want
the O key to dial. Press REDIAL to save the number.
*
to enter a space in the number.
Issue 2.0
Options.
8 - 11