UNIVERGE SV8100
System Hardware Manual
5.
Align the Backboard connector on the Expansion chassis with
the receptor on the Base chassis and push the two chassis
together. Make sure the two screws on the bracket are
positioned high enough to allow the chassis enough space to
connect.
Figure 3-31 Connecting the Base and Expansion Chassis
6.
Using four screws, secure the Expansion chassis to the
Expansion bracket (refer to
Expansion Chassis to the Expansion Bracket on page
Make sure screw has
enough clearance to
fit into slot
Figure 3-32 Securing the
Issue 2.0
3-28).
3 - 27