Section 2 Multiline Terminals - NEC Univerge SV8100 System Hardware Manual

Installing D
S 1 G
ECTION ENERAL
The SV8100 system supports several different Electra Elite IPK II D
Series i multiline terminals and an Attendant Console. This chapter
describes each terminal and the console and provides instructions for
attaching the terminals to the system and for wall mounting.
The new compact 19" chassis provides 104 total ports (80 digital
terminals) and can be expanded, using three additional 19" chassis, for a
maximum of 416 ports (320 digital terminals).
Only the DT300/DT700, D
cordless telephones and wireless telephones discussed in the document
can be installed on the SV8100 system.
S 2 M
ECTION ULTILINE
2.1
System Hardware Manual
term
Series i Telephones
I
NFORMATION
term
To avoid damage to equipment, do not install the
term
D 70 on the SV8100 system. The D
DTP) terminal uses -24V and has no protection from
the -48V power supply used by the SV8100 system.
T
ERMINALS
DTR-2DT-1 TEL
This digital nondisplay multiline terminal has two programmable
line keys (each with a 2-color LED), nine function keys, a built-in
speakerphone, and a large LED to indicate incoming calls and
messages. This terminal is available in black or white.
This terminal has a built-in data port that is available for analog
devices. Each terminal requires a digital port.

The DTR-2DT-1 TEL does not support adapters.
Series i telephones, single line telephones,
term
term
70 (DTU/
Chapter
10
10 - 1