Issue 2.0
4.8
5 - 40
Removal and Replacement of the BS( )-L Kit (Ten Key Kit)
The Business BS( )-L Kit (in black or white), is commonly delivered with the
UNIVERGE SV8100 multiline terminal. If required, the BS( )-L Kit can be
removed and replaced on the DT300/DT700 Series multiline terminal.
The Retro BS( )-L Kit is an optional kit available to be used with the IPK II and
IPS terminals.
4.8.1
Remove the BS( )-L Kit
1.
Pry the right side panel from the multiline terminal (refer to
5-37 Remove Plastic
Line Key
Panel
Numbered
Keypad
Panel
2.
Remove the Numbered Keypad panel. (Refer to paragraph
Figure 5-38 Remove the Ten Key Kit on page
Installing DT300/DT700 Series (DTL/ITL) Digital and IP Multiline Terminals
Panels).
Figure 5-37 Remove Plastic Panels
UNIVERGE SV8100
Figure
Desi Printer
Sheet
Side Panel
5-41.)