UNIVERGE SV8100
6.2
System Hardware Manual
Connected Equipment
Music on Hold and Background Music Sources
External Amplifier
ITL Cabling
Power Requirements
A dedicated 100VAC/
within seven feet of the chassis is required. A separate dedicated outlet for
each chassis should be installed.
Double Pole/Neutral Fusing
(power supply fuses are located at both the L and N side).
6.2.1
Power Supply Specifications
AC Power Supply:
Dedicated 15 Amp circuit
Power Requirements: 120VAC @ 15A Controlling/Base Chassis
Power Consumption: Base Chassis = 263VA,
Expansion Chassis = 263VA, total 1052VA
Input Voltage: 90VAC to 264VAC
(Rated Voltage: 100VAC/120VAC/220VAC – 240VAC)
Frequency: 47Hz – 63Hz (Rated frequency: 50/60Hz)
Phase and Wire: Single Phase, 2 Line + PE Type
Grounding Requirements: No. 14 AWG copper wire
Feeding Voltage: D
With input voltage of 120VAC and with full load conditions:
Output Power: Base chassis=130W, Expansion chassis=130W,
total 520W
AC Input I: Base chassis = 2.19A, Expansion chassis=2.19A, total
8.76A
VA @ 120V: Base chassis = 263VA, Expansion chassis=263VA,
total 1052VA
Table 2-19 Cabling Requirements
120VAC/220VAC/230 – 240VAC
term
/OPX/DID: -48V
SLT: 25mA / -28V
Issue 2.0
Cable
Hi-Fi Shielded Audio Cable
Hi-Fi Shielded Audio Cable
Cat 5 Straight Data Network
Cable – 328.1 ft (100m)
maximum distance
50Hz/60Hz circuit located
2 - 29