UNIVERGE SV8100
System Hardware Manual
2.
Remove the metal support bracket.
3.
Insert the two short-term batteries.
Figure 3-132 Installing the Batteries
4.
Place the battery cable on top of the batteries and adjust to take
up the extra length. Allow enough length for the connections to be
made to the equipment.
5.
The metal bracket is placed on top of the batteries and able to
hold them in place. Insert the metal tabs of the bracket into the
slots on the side of the battery compartment and lower into
place. Using the two screws provided, attach the bracket to the
battery compartment.
Figure 3-133 Installing the Bracket Using Screws
Issue 2.0
3 - 105