UNIVERGE SV8100
LED Indication
Live LED
Busy LED
(Green)
(Red)
On
On
Flash (1s)
On
Flash (1s)
On
Flash
(100ms)
Off
On
Off
Off
Flash 80ms
(On/Off) x 3/
400ms Off
System Hardware Manual
5.7.3
LED Indications
LED indications for the CD-4ODTA are listed in
CD-4ODTA LED
function and LED and Operational status. Refer to
CD-4ODTA Blade on page 4-89
blade.
Table 4-45 CD-4ODTA LED Indications
Operation Status
System Initializing
The assignment of the unit is refused.
Trouble found during self-diagnostics.
A Channel is busy (use
Normal
another from CH1 ~ CHx).
Operation
All channels are idle.
A Channel is busy (use
Unit Busy
another from CH1 ~ CHx).
All channels are idle.
Downloading firmware.
5.7.4
Connectors
Table 4-46 CD-4ODTA RJ-61 Cable Connector Pin-Outs on page
4-92
shows the pin-outs for the RJ-61 connector.
CD-4ODTA Blade on page 4-89
on the ODT blade.
Indications. Each LED is listed with its associated
for the location of the LEDs on the
–
When you exceed the system
capacity.
When the main software
version is not matched.
–
–
–
–
–
–
shows the location of the connectors
Issue 2.0
Table 4-45
Figure 4-34
Remarks
Figure 4-34
4 - 91