Figure 4-12 Ipla Daughter Board; Switch Settings - NEC Univerge SV8100 System Hardware Manual

Issue 2.0
3.4
4 - 32
3.3.3

Switch Settings

This daughter board does not have any switch that needs to be set
and does not require any hardware setting.
PZ-32IPLA/PZ-64IPLA/PZ-128IPLA (Voice over IP Daughter
Boards)

Figure 4-12 IPLA Daughter Board

3.4.1 Description
The PZ-32IPLA/PZ-64IPLA/PZ-128IPLA daughter board is used to
convert the RTP (Real Time Transfer Protocol) packets via the IP
network and PCM highway. The daughter board is installed on the
CD-CP00-US blade. The IP telephones are connected directly to the
IP bus. When IP telephones must be connected to a conventional
PCM-based digital circuit, this board converts the IP packet signal to
a PCM signal format and connects to the PCM time division switch.
The PZ-32IPLA/PZ-64IPLA/PZ-128IPLA daughter board is required
for IP telephones to communicate with non-VoIP UNIVERGE
SV8100 telephones, and place or receive outside calls.
The IPLA daughter board provides the voice (RTP/RTCP)
processing function. The call control function is mounted on the
CD-CP00-US. Only one version of the IPLA daughter board
(PZ-32IPLA, PZ-64IPLA or PZ-128IPLA) can be installed on the
CD-CP00-US.
UNIVERGE SV8100
Installing the SV8100 Blades