Charging The Handset Battery Pack; Battery Hot Swap; Low Battery Indications; Figure 8-24 Replacing The Battery Cover - NEC Univerge SV8100 System Hardware Manual

Hide thumbs Also See for Univerge SV8100:

Table of Contents

Replace the cover and slide it forward until it latches.

Charging the Handset Battery Pack

The rechargeable battery pack must be fully charged before using the D

Cordless Lite II handset for the first time.

Charge the battery pack without interruption for five to eight hours.

Place the handset in the slot of the charging unit.

Make sure the CHARGE indicator lights. If the CHARGE LED does not

come on, check to see if the AC adapter is plugged in and that the

handset is making good contact with the charging contacts on the

charging unit.

The CHARGE LED lights red during and after charging the handset with

the battery.

The battery can be hot swapped while a conversation is taking place. The

battery must be changed within 20 seconds or connection is lost.

The handset has visual and audible indicators to warn of a low battery

condition. The indicators are different for standby mode and talk mode.

Installing SV8100/SV8300 Cordless Telephones

UNIVERGE SV8100/SV8300

Show Quick Links

Table of Contents

Univerge sv8300