Figure 8-16 Placing The Telephone Cords In The Wall Mount Stand; Figure 8-17 Attaching The Wall Mount Unit To The Wall - NEC Univerge SV8100 System Hardware Manual

Issue 1.0
8 - 16

Figure 8-16 Placing the Telephone Cords in the Wall Mount Stand

5. Place the base unit on the posts of the wall screws and push down until
it is firmly seated.

Figure 8-17 Attaching the Wall Mount Unit to the Wall

6. Plug the other end of the short telephone cord in a telephone wall jack.
7. Plug the AC adapter in a standard 120 Vac wall outlet. Refer to
8-14 Plugging the AC Adapter into the Wall Outlet on page
Do not use an outlet controlled by a wall switch.
UNIVERGE SV8100/SV8300
Installing SV8100/SV8300 Cordless Telephones
Figure
8-14.