NEC Univerge SV8100 System Hardware Manual page 338

Issue 1.0
6 - 26
System Program and System Data Storing Memory Circuit
USB Interface Circuit
Ethernet Interface Circuit
PZ-BS10/PZ-BS11 Interface Circuit
Main Processing 32-Bit CPU Circuit (MPC8260 @ 266 MHz)
Time Switch, Optional Blade Control Circuit
Backboard Interface Circuit
The CC-CP00 provides:
512 trunk ports maximum
1290 extension ports maximum (standalone)
– 960 ports digital extension number
– 1024 ports IP extension number
– 1296 analog ports maximum
1500 extension ports maximum (Remote Unit)
– 1500 ports digital and IP extension number
– 1500 analog ports maximum
1000 virtual extensions
Connection for 64/128 VoIP Daughter Blade (PZ-64IPLA, PZ-128IPLA)
Connection for Modem Daughter blade (PZ-VM21)
One Blue Status LED
Three Green Status LEDs
Two Red Status LEDs
Six diagnostic LEDs which indicate the status of various system
functions
During normal operation, the "RUN" LED will be flashing and the
remaining LEDs will be off.
1019x1019 Time Division Multiplex Switch (TDM Switch)
Digital Phase Locked Loop (DPLL)
Tone Generator
Tone Processing DSP
Connection for Memory Module
DSP
TDSW
DTMF Tone Sender: 64 channels
DTMF Tone Receiver: 64 channels
UNIVERGE SV8100/SV8300
Installing the SV8100/SV8300 Blades