UNIVERGE SV8100/SV8300
System Hardware Manual
12.3.1
ADA-L UNIT Switch Settings
Figure 11-48 ADA-L UNIT
dip switches (DSW) allow a technician to configure the unit for
specific settings.
Due to location, set switches prior to installation of
ADA-L on DTL/ITL multiline terminal.
To provide control to the recorder or to enable/disable the record start warning
tones, refer to
Table 11-3 ADA-L Unit Switch
Switch
SW1
SW2
shows the location of the switches. The
Figure 11-48 ADA-L UNIT
Table 11-3 ADA-L Unit Switch Settings
SW1-1
Connects to Multiline Terminal
Connect = Default
SW1-2
Not Used
Sets External Equipment Impedance to 600 Ω
SW2-1
SW2-2
Used for Complex Impedance Devices
(< 30 Ω Input Impedance)
Settings.
Description/Settings
Issue 1.0
11 - 71